Thursday, October 29, 2015

How To Root Motorola Moto G 1st Generation

Root Motorola Moto G 1st Generation XT1032, XT1033 etc. First, here are the pre-requisites for it all to work :   You need 3 thi... thumbnail 1 summary

Root Motorola Moto G 1st Generation XT1032, XT1033 etc.



First, here are the pre-requisites for it all to work:
 You need 3 thingsto root moto g

  • Back up your phone first!!!

    Warning: Unlocking your phone’s bootloader voids its warranty. It also completely wipes (formats) your Android phone’s internal memory including applications, contacts, images and so on.
  • The phone’s battery must be charged to at least 80%.
  • USB debugging must be “ON”.
  • Motorola USB drivers must be installed on a computer
 Requirement setup download first below :


How to Root Moto G

There are are three simple steps only

1. UNLOCK BOOTLOADER

2. FLASH CUSTOM RECOVERY [I USED CWM]

3. FLASH SUPERSU

DONE

Yeah ...you don't need to downgrade your bootloader which is very risky

Procedure

1. UNLOCKING BOOTLOADER :- i thinks its already explained well at different sites and motorola's site also [ i used this guide Moto-g-unlock-bootloader-and-root only for unlocking]

2. FLASHING RECOVERY-

You need 3 things
(a) motorola usb drivers [download from here ]
(b) adb drivers (download from here ]
(c) Custom recovery (cwm download from here ) i used cwm without touch 
 OR
 USE PHILZ RECOVERY (4.4.4)(download from here)

Real procedure:-

1. install motorola usb drivers

2. extract adb drivers anywhere in your computer

3. copy recovery.img [i renamed it to only recovery] into adb tools folder

4. boot your phone into fastboot mode by pressing volume down key and pressing power key simultaneously , and then releasing power key .

5. connect your moto g to your computer through data cable

6. go into adb tools folder => while pressing shift key => right click => and click open cmd here !

7. type [fastboot flash recovery recovery.img] and press enter { IGNORE Mismatched partition size' AFTER FLASHING RECOVERY }

DONE  just press volume down and then volume up to boot into cwm

3. FLASHING SUPER SU

1. DOWNLOAD THIS FILE FROM HERE

2. PUT IT IN INTERNAL MEMORY

PROCEDURE => IN CWM =>INSTALL FROM SD CARD => CHOOSE SUPER SU => 
RESTART
It will ask 'root is broken' WHEN REBOOTING FROM CWM. CHOOSE YES

congratulation ur moto g is now rooted DONE !

  It was a bit tedious, but not hard, was it? Let us know if this worked out for you and how the whole process went in the comments section below.

No comments

Post a Comment